金蜘蛛紧固件网上海紧固件与技术展jzz
首页业界信息→【收藏】日标(JIS)目录大全
你是本网站第35344660位访客
广告广告广告
上海紧固件与技术展
上海紧固件与技术展



2018年上半年培训计划
【杭州】
● 紧固件冷镦技术及应用
3月29日 龚茂良

● 五金零部件和紧固件的表面处理以及质量控制
5月24日 雷勋山


英文采购指南CFD环球之旅
全英文采购指南CFD环球之旅 全英文采购指南CFD环球之旅
CFD后续参展计划:

◆越南制造业博览会(8.8-10)

◆上海紧固件与技术展(9.26-29)

◆日本大阪机械零部件及加工技术展(10.3-5)



全英文采购指南CFD

打开门迎接国外客户


浏览数:1156 推荐度: 投票数:0评论数:0
【收藏】日标(JIS)目录大全

日标(JIS)目录大全

2016年版日标
JIS Handbook
Fasteners & Screw Threads - 2016


jzz

简介:

包括术语,标记和图纸/基础件(通用)/零部件/通用螺钉螺纹零部件(包括垫圈)。

目录:
Fasteners & Screw Threads:Contents
Terms,Designation and Drawing

JIS B 0002-1:1998 Technical drawings-Screw threads and threaded parts-
Part 1:General conventions ……ISO 6410-1:1993 (IDT)

JIS B 0002-2:1998 Technical drawings-Screw threads and threaded parts-
Part 2:Screw thread inserts ……ISO 6410-2:1993 (IDT)

JIS B 0002-3:1998 Technical drawings-Screw threads and threaded parts-
Part 3:Simplified representation ……ISO 6410-3:1993 (IDT)

JIS B 0101:2013 Screw threads and fasteners-Vocabulary ……ISO 1891,5408:2009 (MOD)

JIS B 0123:1999 Designation system for screw threads

JIS B 0143:2013 Fasteners-Bolts, screws, studs and nuts-Symbols and
descriptions of dimensions ……ISO 225:2010 (IDT)

JIS B 0147:2004 Blind rivets-Terminology and definitions ……ISO 14588:2000 (IDT)

JIS B 1010:2003 Designation system for fasteners ……ISO 8991:1986 (IDT)

Basics (General Use)

JIS B 0201:1973 Miniature screw threads ……ISO/R 1501:1970 (MOD)

JIS B 0202:1999 Parallel pipe threads ……ISO 228-1:1994 (MOD)

JIS B 0203:1999 Taper pipe threads ……ISO 7-1:1994 (MOD)

JIS B 0205-1:2001 ISO general purpose metric screw threads-Part 1:Basic
profile ……ISO 68-1:1998 (IDT)

JIS B 0205-2:2001 ISO general purpose metric screw threads-Part 2:General plan ……ISO 261:1998 (IDT)

JIS B 0205-3:2001 ISO general purpose metric screw threads-Part 3:Selected sizes for screws,bolts and nuts ……ISO 262:1998 (IDT)

JIS B 0205-4:2001 ISO general purpose metric screw threads-Part 4:Basic dimensions ……ISO 724:1993 (IDT)

JIS B 0206:1973 Unified coarse screw threads ……ISO 263:1973 (MOD)

JIS B 0208:1973 Unified fine screw threads ……ISO 263:1973 (MOD)

JIS B 0209-1:2001 ISO general purpose metric screw threads-Tolerances-Part1:Principles and basic data …… ISO 965-1:1998 (IDT)

JIS B 0209-2:2001 ISO general purpose metric screw threads-Tolerances-Part 2:Limits of sizes for general purpose external and internal
screw threads-Medium quality … ISO 965-2:1998 (IDT)

JIS B 0209-3:2001 ISO general purpose metric screw threads-Tolerances-Part3:Deviations for constructional screw threads ……ISO 965-3:1998 (IDT)

JIS B 0209-4:2001 ISO general purpose metric screw threads-Tolerances-Part4:Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing ……ISO 965-4:1998 (IDT)

JIS B 0209-5:2001 ISO general purpose metric screw threads-Tolerances-Part5:Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing ……ISO 965-5:1998 (IDT)

JIS B 0210:1973 Limits of sizes and tolerances for unified coarse screw threads

JIS B 0212:1973 Limits of sizes and tolerances for unified fine screw threads

JIS B 0216-1:2013 ISO metric trapezoidal screw threads-Part 1:Basic profiles and maximum material profiles ……ISO 2901:1993 (IDT)

JIS B 0216-2:2013 ISO metric trapezoidal screw threads-Part 2:General plan……ISO 2902:1977 (IDT)

JIS B 0216-3:2013 ISO metric trapezoidal screw threads-Part 3:Basic
dimensions ……ISO 2904:1977 (IDT)

JIS B 0217-1:2013 ISO metric trapezoidal screw threads-Tolerances-Part 1:Principles and basic data ……ISO 2903:1993 (MOD)

JIS B 0217-2:2013 ISO metric trapezoidal screw threads-Tolerances-Part 2:Limits of sizes for external and internal screw thread

Components

JIS B 1001:1985 Diameter of clearance holes and counterbores for bolts and
screws ……ISO 273:1979 (MOD)

JIS B 1002:1985 Dimensions of widths across flats ……ISO 272:1982,2343:1972,4762:1977 (MOD)

JIS B 1003:2014 Fasteners-Ends of parts with external ISO metric thread …
…ISO 4753:2011 (IDT)

JIS B 1004:2009 Hole sizes before threading

JIS B 1005:2003 General purpose bolts and screws-Metric series-Radii
under the head ……ISO 885:2000 (IDT)

JIS B 1006:2009 Fasteners-Thread run-outs for external thread in accordance with ISO general purpose metric screw threads ……ISO 3508:1976 (MOD)

JIS B 1008:2009 Fasteners-Bolts and studs-Split pin holes and wire holes
……ISO 7378:1983 (MOD)

JIS B 1012:1985 Cross recesses for screws ……ISO 4757:1983 (MOD)

JIS B 1013:1994 Countersunk head screws-Head configuration and gauging
……ISO 7721:1983 (IDT)

JIS B 1014:1994 Countersunk flat head screws-Part 2:Penetration depth
of cross recesses ……ISO 7721-2:1990 (IDT)

JIS B 1015:2008 Hexalobular internal driving feature for bolts and screws …
…ISO 10664:2005 (IDT)

JIS B 1016:2006 Gauging of hexagon sockets ………ISO 23429:2004 (IDT)

JIS B 1017:2008 Countersinks for countersunk head screws……ISO 15065:2005 (IDT)

JIS B 1018:2009 Fasteners-Thread undercuts for external metric ISO threads
……ISO 4755:1983 (IDT)

JIS B 1021:2003 Tolerances for fasteners-Part 1:Bolts,screws,studs and nuts-Product grades A,B and C ……ISO 4759-1:2000 (IDT)

JIS B 1022:2008 Tolerances for fasteners-Part 3:Plain washers for bolts,screws and nuts-Product grades A and C ……ISO 4759-3:2000 (IDT)

JIS B 1041:1993 Fasteners-Surface discontinuities-Part 1: Bolts,screws
and studs for general requirements ……ISO 6157-1:1988 (IDT)

JIS B 1042:1998 Fasteners-Surface discontinuities-Part 2:Nuts ……ISO 6157-2:1995 (IDT)

JIS B 1043:1993 Fasteners-Surface discontinuities-Part 3:Bolts,screws
and studs for special requirements ……ISO 6157-3:1988 (IDT)

JIS B 1044:2001 Fasteners-Electroplated coatings ……ISO 4042:1999 (IDT)

JIS B 1045:2001 Fasteners-Preloading test for the detection of hydrogen
embrittlement-Parallel bearing surface method ……ISO 15330:1999 (IDT)

JIS B 1046:2005 Fasteners-Non-electrolytically applied zinc flake coatings
……ISO 10683:2000 (IDT)

JIS B 1047:2006 Passivation of corrosion-resistant stainless-steel fasteners ……ISO 16048:2003 (IDT)

JIS B 1048:2007 Fasteners-Hot dip galvanized coatings ……ISO 10684:2004 (MOD)

JIS B 1054-1:2013 Mechanical properties of corrosion-resistant stainless steel fasteners-Part 1:Bolts, screws and studs ……ISO 3506-1:2009 (IDT)

JIS B 1054-2:2013 Mechanical properties of corrosion-resistant stainless steel fasteners-Part 2:Nuts…………ISO 3506-2:2009 (IDT)

JIS B 1054-3:2013 Mechanical properties of corrosion-resistant stainless steel fasteners-Part 3:Set screws and similar fasteners not under tensile stress ……ISO 3506-3:2009 (IDT)

JIS B 1054-4:2013 Mechanical properties of corrosion-resistant stainless steel fasteners-Part 4:Tapping screws ……ISO 3506-4:2009 (IDT)

JIS B 1056:2011 Prevailing torque type steel nuts-Mechanical and performance properties ……ISO 2320:2008 (MOD)

JIS B 1057:2001 Mechanical properties of non-ferrous metal fasteners ……ISO 8839:1986 (MOD)

JIS B 1058:1995 Mechanical properties of fasteners Part 7:Torsional test
and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm ……… ISO 898-7:1992 (IDT)

JIS B 1059:2001 Drilling screws with tapping screw thread-Mechanical and
functional properties ……ISO 10666:1999 (IDT)

JIS B 1060:2003 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws ……ISO 7085:1999 (IDT)

JIS B 1071:2010 Fasteners-Methods of verification for size and geometry

JIS B 1081:1997 Threaded fasteners-Axial load fatigue testing-Test
methods and evaluation of results …ISO 3800:1993 (IDT)

JIS B 1082:2009 Stress area and bearing area for threaded fasteners

JIS B 1083:2008 General rules for tightening of threaded fasteners

JIS B 1084:2007 Fasteners-Torque/clamp force testing ……ISO 16047:2005 (IDT)

JIS B 1085:1995 Cone proof load test on nuts ……ISO 10485:1991 (IDT)

JIS B 1086:1998 Widening test on nuts ……ISO 10484:1997 (IDT)

JIS B 1087:2004 Blind rivets-Mechanical testing ……ISO 14589:2000 (IDT)

JIS B 1091:2003 Fasteners-Acceptance inspection ……ISO 3269:2000 (IDT)

JIS B 1092:2006 Fasteners-Quality assurance system……ISO 16426:2002 (IDT)

JIS B 1099:2012 Fasteners-General requirements for bolts, screws, studs and nuts ……ISO 8992:2005 (IDT)

Screw Threads Components
(including Washers) for General Use

Machine screw

JIS B 1101:1996 Slotted head screws

JIS B 1101:2006 Amendment 1

JIS B 1111:1996 Cross recessed head screws

JIS B 1111:2006 Amendment 1
 
JIS B 1116:2009 Slotted head screws for precision instruments

JIS B 1119:1995 Machine screws and nuts for spectacle frames ……ISO 11381:1994 (MOD)

JIS B 1130:2012 Screw and washer assemblies made of steel with plain
washers-Washer hardness classes 200 HV and 300 HV ……ISO 10644:2009 (MOD)

JIS B 1188:1995 Cross recessed head screws with captive washer

JIS B 1188:2006 Amendment 1

Set screw

JIS B 1117:2010 Slotted set screws ……ISO 4766,7434 ~ 7436:1983 (MOD)

JIS B 1118:2010 Square head set screws

JIS B 1177:2007 Hexagon socket set screws ……ISO 4026 ~ 4029:2003 (MOD)

Tapping screw

®JIS B 1115:2015 Slotted head tapping screws

®JIS B 1122:2015 Cross recessed head tapping screws

®JIS B 1123:2015 Hexagon head tapping screws

®JIS B 1124:2015 Drilling screws with tapping screw thread……ISO 15480 ~ 15483:1999 (MOD)

®JIS B 1125:2015 Self drilling tapping screws

®JIS B 1126:2015 Hexagon washer head tapping screws ……ISO 7053:2011 (MOD)

®JIS B 1127:2015 Hexagon flange head tapping screws ……ISO 10509:2012 (MOD)

JIS B 1128:2004 Hexalobular socket head tapping screws ……ISO 14585 ~ 14587:2001 (MOD)

JIS B 1129:2004 Tapping screw washer assemblies with plain washers……ISO 10510:1999 (IDT)

Wood screw

JIS B 1112:1995 Cross-recessed head wood screws

JIS B 1135:1995 Slotted head wood screws

Bolts

JIS B 1166:2009 T-slot bolts

®JIS B 1166:2015 Amendment 1

JIS B 1168:1994 Eyebolts

JIS B 1171:2005 Cup head square neck bolts ……ISO 8678:1988 (MOD)

®JIS B 1171:2015 Amendment 1

JIS B 1173:2010 Studs

®JIS B 1173:2015 Amendment 1

JIS B 1174:2006 Hexagon socket button head screws ……ISO 7380:2004 (MOD)

JIS B 1175:1988 Hexagon socket head shoulder screws ……ISO 7379:1983 (MOD)

JIS B 1176:2014 Hexagon socket head cap screws ……ISO 4762:2004,12474:2010 (MOD)

®JIS B 1176:2015 Amendment 1

JIS B 1178:2009 Foundation bolts

®JIS B 1178:2015 Amendment 1

JIS B 1179:2009 Flat head bolts

®JIS B 1179:2015 Amendment 1

JIS B 1180:2014 Hexagon head bolts and hexagon head screws ……ISO 4014:2011,4015:1979,4016 ~ 4018,8676,8765:2011 (MOD)

JIS B 1182:2009 Square head bolts

®JIS B 1182:2015 Amendment 1

JIS B 1184:2010 Wing bolts

JIS B 1187:1995 Hexagon head screws with captive washer

JIS B 1187:2006 Amendment 1

JIS B 1189:2014 Hexagon bolts with flange ……ISO 15071:2011,15072:2012 (MOD)

®JIS B 1189:2015 Amendment 1

JIS B 1194:2006 Hexagon socket countersunk head screws ……ISO 10642:2004 (MOD)

JIS B 1195:2009 Weld bolts

®JIS B 1195:2015 Amendment 1

Nuts

JIS B 1163:2009 Square nuts

JIS B 1167:2011 T-slot nuts

JIS B 1169:1994 Eyenuts

JIS B 1170:2011 Hexagon slotted and castle nuts

JIS B 1181:2014 Hexagon nuts and hexagon thin nuts……ISO 4032 ~ 4036,8673 ~ 8675:2012 (MOD)

JIS B 1183:2010 Domed cap nuts

JIS B 1185:2010 Wing nuts

JIS B 1190:2014 Hexagon nuts with flange ……ISO 4161,10663:2012 (MOD)

JIS B 1196:2010 Weld nuts

JIS B 1199-1:2001 Prevailing torque type nuts-Part 1:Hexagon nuts with
non-metallic insert ……ISO 7040,7041,10511,10512:1997 (MOD)

JIS B 1199-1:2008 Amendment 1

JIS B 1199-2:2001 Prevailing torque type nuts-Part 2:All-metal hexagon nuts……ISO 7042,7719,7720,10513:1997 (MOD)

JIS B 1199-3:2001 Prevailing torque type nuts-Part 3:Hexagon nuts with
flange with non-metallic insert ……ISO 7043,12125:1997 (MOD)

JIS B 1199-4:2001 Prevailing torque type nuts-Part 4:All-metal hexagon
nuts with flange ……ISO 7044,12126:1997 (MOD)

JIS B 1200:2007 Hexagon weld nuts with flange……ISO 21670:2003 (MOD)

JIS B 1216:2006 Push-on spring nuts

Washers

JIS B 1250:2008 Plain washers for metric bolts,screws and nuts for general
purposes-General plan …… ISO 887:2000 (IDT)

JIS B 1251:2001 Spring lock washers

JIS B 1256:2008 Plain washers …… ISO 7089 ~ 7094:2000 (MOD)

JIS B 1257:2004 Plain washers for tapping screw and washer assemblies-
Normal and large series-Product grade A ……ISO 10669:1999 (IDT)

JIS B 1258:2012 Plain washers for screw and washer assemblies-Small,
normal and large series-Product grade A ……ISO 10673:2009 (MOD)

欢迎咨询

欲了解更多相关信息或购买标准书籍,可致电金蜘蛛传媒:020-38861363。

(来源:金蜘蛛紧固件网微信公众号)

2018/6/12 10:42:00

金蜘蛛传媒微信公众号

分享到:
上一篇:环保督察启动“回头看” 重点关注整改虚、假、空
下一篇:柏中Bossard紧固件物流项目落户开发区

最新的相关信息:
【海盐正茂 | 926上海】机螺钉、三角自锁螺钉等紧固件专业制造商——2018-08-14
【瑞安中海 | 926上海】挡圈专业制造商——2018-08-10
【台湾乔方 | 926上海】精密五金零件专业供货商——2018-08-09
【温州三诚 | 926上海】各类精密五金紧固零件、非标件专业制造商——2018-08-07
【无锡驰阳 | 926上海】干壁钉、纤维板钉、自攻钉等专业制造商——2018-08-06
【东莞瑞铭 | 926上海】高速钢、钨钢及各类异型钨钢冲棒专业制造商——2018-08-01

本文涉及话题: 标准 金蜘蛛

编辑推荐:
jzz

紧固件顶尖专家聚首2018上海紧固件与技术展!马上报名,获取免费听课名额!
jzz

泰国发力4.0,中国紧固件企业机会来了?——2018泰国制造业博览会报道
jzz

全球紧固件行业首个全英文微信公众号FastenerInfo正式启航!

你对本文的评价如何?

☆☆☆☆☆(优秀)
☆☆☆☆(好)
☆☆☆(一般)
☆☆(较差)
☆(糟糕)


法律声明: 本网站中的厂商资料,供货,需求,合作等信息由本网站的注册会员发布,其合法性和真实性由各个发布信息的注册会员负责。

公司简介 - 高级会员服务 - 广告服务 - 付费信息 - 联系我们 - 帮助信息 - 友情链接 - English Version - 繁体版 - 网通站
Copyright ©2013 Golden Spider Network Co., Ltd. All rights reserved.
站点维护:广东金蜘蛛电脑网络有限公司 电子邮箱:    7*24小时服务热线:13710993339
联系电话/传真:广州:(020)38861363 / 38861343  杭州:(0571)87166630 / 87166613  成都:(028)83321363 / 83398363
经营许可证编号:粤B2-20050251号 备案号:粤ICP备09029740号

粤公网安备 44011102001662号

110 biaoshi 安网 jjcc anquan
博聚网